dakota bulldozer, 2018-01-07 01:43:53. Large-diameter bushings, increased track link heights, and improved oil-seals help to increase undercarriage durability. Serviceability has also been improved with the addition of remote greasing of the equalizer bar center pin.
dakota bulldozer, 2018-01-07 01:44:05. With the Closed-center Load Sensing (CLSS) hydraulic system, blade lever stroke is directly proportional with blade speed, regardless of the load and travel speed. This results in superb, fine controllability.
dakota bulldozer, 2018-01-07 01:44:00. Powerful S6D125E-2 diesel engine provides a massive output of 149 kW 200 HP. The engine power is transmitted smoothly to the final drives via a high-efficiency torque converter.
mantan Drilling, 2017-12-03 03:09:59. New portable drillcat technology uses smaller portable trailer mounted rigs with shorter 3-metre (10 ft) drill pipe. The shorter drill pipe also allows a much smaller mast. Portable trailer mounted drilling rigs have drill ratings from 90 to 200 metres (300 to 800 ft) depending on mud pump flow and pressure ratings and drill pipe sizes.
mantan Drilling, 2017-12-03 03:09:59. Drilling rigs used for rock blasting for surface mines vary in size dependent on the size of the hole desired, and is typically classified into smaller pre-split and larger production holes. Underground mining (hard rock) uses a variety of drill rigs dependent on the desired purpose, such as production, bolting, cabling, and tunnelling.
mantan Drilling, 2017-12-03 03:09:59. In the 1970s, outside of the oil and gas industry, roller bits using mud circulation were replaced by the first pneumatic reciprocating piston Reverse Circulation (RC) drills, and became essentially obsolete for most shallow drilling, and are now only used in certain situations where rocks preclude other methods.
dakota excavator, 2017-12-11 09:57:10. Crawler excavator runs on two endless tracks (chain wheel system). These types of excavators are used in hilly areas where risks of sliding of machinery are on the verge. Crawler type excavator has low ground pressure because of spreading of load on large area. Therefore, it is also used where soil support is weak.
dakota excavator, 2017-12-11 09:57:20. The two main sections of an excavator are the undercarriage and the house. The undercarriage includes the blade (if fitted), tracks, track frame, and final drives, which have a hydraulic motor and gearing providing the drive to the individual tracks, and the house includes the operator cab, counterweight, engine, fuel and hydraulic oil tanks. The house attaches to the undercarriage by way of a center pin. High pressure oil is supplied to the tracksá hydraulic motors through a hydraulic swivel at the axis of the pin, allowing the machine to slew 360° unhindered.
mantan Drilling, 2017-12-03 03:09:59. There are a variety of drill mechanisms which can be used to sink a borehole into the ground. Each has its advantages and disadvantages, in terms of the depth to which it can drill, the type of sample returned, the costs involved and penetration rates achieved. There are two basic types of drills: drills which produce rock chips, and drills which produce core samples.
mantan Drilling, 2017-12-03 03:09:58. Some light duty drilling rigs are like a mobile crane and are more usually used to drill water wells. Larger land rigs must be broken apart into sections and loads to move to a new place, a process which can often take weeks.
mantan Drilling, 2017-12-03 03:09:58. Mining drilling rigs are used for two main purposes, exploration drilling which aims to identify the location and quality of a mineral, and production drilling, used in the production-cycle for mining.
dakota excavator, 2017-12-11 10:25:52. The main function of the excavator engine is to drive the hydraulic pumps that provide oil at a high pressure to the slew motor, rams, track motors, and several accessories. Mostly, the boom can move only up and down, or in addition also shift towards the left and right of the machine. An arm is attached to the boom end that imparts the force for digging into the ground. A bucket is fixed at the arm end for carrying the soil. In addition, there are numerous other categories of attachments with the excavator that are used for boring, crushing, lifting, and ripping.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Thomaskc.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.