dakota excavator, 2017-12-29 03:05:15. There are two main types of "Control" configuration generally use in excavators to control the boom and bucket, both of which spread the four main digging controls between two x-y joysticks. This allows a skilled operator to control all four functions simultaneously. The most popular configuration in the US is the SAE controls configuration while in other parts of the world, the ISO control configuration is more common. Some manufacturers such as Takeuchi have switches that allow the operator to select which control configuration to use.
dakota excavator, 2017-12-29 03:06:05. Wheel excavator runs on wheels and are used for excavation and loading of dump trucks and most of the time it is only used for plain ground operations. Because of wheel, it is not suitable for hilly areas due to low grip value to the ground.
dakota excavator, 2017-12-29 03:06:03. Crawler excavator runs on two endless tracks (chain wheel system). These types of excavators are used in hilly areas where risks of sliding of machinery are on the verge. Crawler type excavator has low ground pressure because of spreading of load on large area. Therefore, it is also used where soil support is weak.
mr.wicks Drilling, 2017-09-03 04:43:17. Small to medium-sized drilling rigs are mobile, such as those used in mineral exploration drilling, blast-hole, water wells and environmental investigations. Larger rigs are capable of drilling through thousands of metres of the Earth s crust, using large "mud pumps" to circulate drilling mud (slurry) through the drill bit and up the casing annulus, for cooling and removing the "cuttings" while a well is drilled.
mr.wicks Drilling, 2017-09-02 12:53:42. Oil and natural gas drilling rigs are used not only to identify geologic reservoirs but also to create holes that allow the extraction of oil or natural gas from those reservoirs. Primarily in onshore oil and gas fields once a well has been drilled, the drilling rig will be moved off of the well and a service rig (a smaller rig) that is purpose-built for completions will be moved on to the well to get the well on line.
mr.wicks Drilling, 2017-09-02 11:20:00. RAB drilling is used primarily for mineral exploration, water bore drilling and blast-hole drilling in mines, as well as for other applications such as engineering, etc. RAB produces lower quality samples because the cuttings are blown up the outside of the rods and can be contaminated from contact with other rocks.
mr.wicks Drilling, 2017-09-02 09:53:59. RAB drilling at extreme depth, if it encounters water, may rapidly clog the outside of the hole with debris, precluding removal of drill cuttings from the hole. This can be counteracted, however, with the use of "stabilizers" also known as "reamers", which are large cylindrical pieces of steel attached to the drill string, and made to perfectly fit the size of the hole being drilled. These have sets of rollers on the side, usually with tungsten buttons, that constantly break down cuttings being pushed upwards.
mr.wicks Drilling, 2017-09-02 14:49:03. Other, heavier, truck rigs are more complicated, thus requiring more skill to run. They re also more difficult to handle safely due to the longer 6-to-9-metre (20 to 30 ft) drill pipe. Large truck rigs also require a much higher overhead clearance to operate.
mr.wicks Drilling, 2017-09-02 16:29:27. Large truck drills can use over 570 litres (150 US gal) of fuel per day, while the smaller Deeprock Style portable drills use a mere 20 to 75 litres (5 to 20 US gal) of fuel per day. This makes smaller, more portable rigs preferable in remote or hard-to-reach places, and they are more cost effective when fuel prices are high.
mr.wicks Drilling, 2017-09-02 15:29:28. Drilling rigs used for rock blasting for surface mines vary in size dependent on the size of the hole desired, and is typically classified into smaller pre-split and larger production holes. Underground mining (hard rock) uses a variety of drill rigs dependent on the desired purpose, such as production, bolting, cabling, and tunnelling.
mr.wicks Drilling, 2017-09-02 17:25:45. The well had a particularly small mouth, "as small as a small bowl." Archaeological evidence of the drilling tools used in deep-well dwelling are kept and displayed in the Zigong Salt Industry Museum. According to Salt: A World History, a Qing Dynasty well, also located in Zigong, "continued down to 3,300 feet [1,000 m] making it at the time the deepest drilled well in the world." Mechanised versions of this system persisted until about 1970, using a cam to rapidly raise and drop what, by then, was a steel cable up to 3 mm.
mr.wicks Drilling, 2017-09-02 15:47:21. New portable drillcat technology uses smaller portable trailer mounted rigs with shorter 3-metre (10 ft) drill pipe. The shorter drill pipe also allows a much smaller mast. Portable trailer mounted drilling rigs have drill ratings from 90 to 200 metres (300 to 800 ft) depending on mud pump flow and pressure ratings and drill pipe sizes.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Thomaskc.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.